Amigurumi Plush Bunny Free Crochet Pattern

Pinterest Offical Page : Freeamigurumi

Facebook Group: Crochet and Amigurumi Free Pattern

Facebook Offical Page: Free Amigurumi Patterns

“Zainka”

We share the most beautiful amigurumi patterns. This time, we share the plush bunny pattern and it’s free.

Legend:

İnc-add

Dec-subtract

Ch.-air loop

Additional marker – additional marker

Sc single crochet

Ch-Lift Loop

(1sc, inc) -repeat knitting to end of row

 Head:

The marker goes from the beginning of knitting from the chin to the back of the head

2 ch. , from the second loop we knit 6 sc

2p-inc (12)

3p- (1 sc, inc) (18)

4p-knit in a circle (18)

5p- (2 sc, inc) (24)

6-8r-knit in a circle (24) 3 rows

9p- (3 sc, inc) (30)

10p- (4 sc, inc) (36)

11р- (5 sc, inc) (42)

12p- (6 sc, inc) (48)

13p- (7 sc, inc) (54)

We put an additional marker at the end of knitting.

14-22p-knit in a circle (54) 9 rows

23p- (7 sc, dec) (48)

24p- (6 sc, dec) (42)

25 p- (5 sc, dec) (36)

26p- (4 sc, dec) (30)

We retreat 3 rows towards the back of the head from the additional marker and put the head cotter pin (button).

27p- (3 sc, dec) (24)

Stuff your head tightly.

28p- (2 sc, dec) (18)

29 p- (1 sc, dec) (12)

30p-dec (6)

Close all loops. We hide the end of the thread in the head.

Upper legs:

2 ch., Of which 6 sc

2 p-inc (12)

3p- (1 sc, inc) (18)

4p- (2 sc, inc) (24)

5-7p-in a circle (24) 3 rows

8p- (2 sc, dec) (18)

9p-in a circle (18)

10p- (4 sc, dec) (15)

We put a marker.

11-23r-knit in a circle (15) 13 rows

We step back 2 rows down and put a cotter pin along the marker line.

Insert the wire, measure it to the desired length, fold it into such a loop. The ends of the wire should be in the middle. Wrap them with adhesive tape. The narrow end is the shoulder, wide head.

We stuff.

11p (dec)

We reduce to the end, hide the thread inside.

Lower legs:

We start with pink cotton yarn in 2 strands.

9 ch., In 2nd st and tie around: 7 sc, 3 inc in last, 6 sc, inc (18)

2p- inc, 6 sc, 3 inc, 6 sc, 2 inc (24)

3р-1 sc, inc, 6 sc, (1 sc, inc) * 3 times, 6 sc, (1 sc, inc) * 2 times (30)

Change the yarn to Softy.

4 р-2 sc, inc, 6 sc, (2 sc, inc) * 3 times, 6 sc, (2 sc, inc) * 2 times (36)

We put a marker in the middle of the heel. Now we are guided by it.

5-8r-knit in a circle (36) 4 rows

9 p-9 sc, (1 sc, dec) * 6 times, 9 sc (30)

10 p-9 sc, 6 dec, 9 sc (24)

11 p-9 sc, 3 dec, 9 sc (21)

12 p- (5 sc, dec) (18)

13-22 p-knit in a circle (18) 10 rows

To fill, not to the end. On the side, we retreat 2 rows down and put the cotter pin. We fill it completely.

23p- (1 sc, dec)

We continue to decrease and close. We hide the thread inside.

Corpuscle:

The marker goes in the middle of the back.

2 ch. of which 6 sc

2p-inc (12)

3p- (1 sc, inc) (18)

4p- (2 sc, inc) (24)

5p- (3 sc, inc) (30)

6p-knit in a circle (30)

7p- (4 sc, inc) (36)

At the beginning of knitting, we put the head cotter pin. We fix the head.

8-12r-knit in a circle (36) 5 rows

13р- (5 sc, inc) (42)

 To the left and right of the marker, we retreat 10 loops. We retreat 6 rows down and install the upper legs.

14p-knit in a circle (42)

15р- (6 sc, inc) (48)

16-22p-knit in a circle (48) 7 rows.

23p- (6 sc, dec) (42)

24p- (5 sc, dec) (36)

25p- (4 sc, dec) (30)

26p- (3 sc, dec) (24)

Along the line of the upper legs, stepping back 3 rows down, install the cotter pins of the legs.

27p- (2sc, dec) (18)

Fill tightly.

28p- (1 sc, dec) (12)

Decreases, close. Hide the thread.

Ears:

At the beginning of each row, do not forget to make a lifting loop!

2 ch. of which 4 sc, are unclosed.

2 p-ch., (Inc) (8).

3p-ch., (1 sc, inc) (12) Rotate

4p-ch., (2 sc, inc) (16) turn

Then we knit along the end (straight part). All rows are rotary

5 p-ch., 9 sc (9)

6p-ch, 4 sc, inc, 4 sc (10)

7p-ch., 4 sc, inc, 5 sc (11)

8p-ch., 5 sc, inc, 5 sc (12)

9p-ch., 5 sc, inc, 6 sc (13)

10p-ch., 6 sc, inc, 6 sc (14)

11p-ch., 6 sc, inc, 7 sc (15)

12p-ch., 7 sc, inc, 7 sc (16)

13p-ch., 7 sc, inc, 8 sc (17)

14p-ch., 8 sc, inc, 8 sc (18)

15-28р- we knit in a straight line (18) 14 rows.

29p- ch., 1 sc, dec, 12 sc.dec, 1 sc (16)

30p-knit straight (16)

31p-ch., 1 sc, dec, 10 sc, dec. 1 sc (14)

32p-knit straight (14)

33p-ch., 1 sc, dec, 8 sc, dec, 1 sc (12)

34r-knit straight (12)

35p-ch., 1 sc, dec, 6 sc, dec, 1 sc (10)

36-40r – knit straight (10) 5 rows. We fasten and cut the thread.

We cut out parts equal to the ear from fabric, suede or fur and sew them to it, bending the edges by 0.5 cm.

Sew the upper edge together by about 1.5-2 cm. Here you can clearly see:

Sew to the head above the shoulder, at a height of 3-4 cm. We count the height from the shoulder, not on the head!

It turned out such an eared)))

 Face design:

If you still have a marker, as I have in the photo above, then from it up we count 7 rows up or 4 rows from the beginning of knitting and put the first pin (red). Then we put dots, focusing on my photo. Between pink dots, the distance is 8 loops, between pink and purple 6 loops, between red and purple 7 loops.

We put the needle in the red point, bring it out to the purple one, put it in the pink one, and then put it out in the other pink one. Etc. We tighten it very strongly.

We glue the eyes and nose. Make sure that the glue does not get on the outside of the eye, otherwise you will not get rid of it. The eye will deteriorate.

We glue the cilia. Cut one in half and glue it neatly on top.

Let’s start toning. We carefully tint the dimple of the mouth.

Apply a little tint around the nose and blend it well.

Then we tint around the eyes. Closer to the eye, the toning should be slightly darker.

We shade everything thoroughly, let it dry if toning requires it (aging agent, marker, oil paints).

 Dress and hat for Zainka.

Before we start knitting clothes, we need to make several calculations – how many loopsyou need to dial on the knitting needles to start knitting the hat and bodice of the dress. To do this, from the selected yarn, you need to knit small pieces of 15 loops in 10 rows. Count how many loops you get in one centimeter.

Next, we measure the circumference of the neck and head with a measuring tape. If there is no tape, then a string will come in handy, then you can measure it with a ruler.

My bunny’s head circumference is 25 cm

Neck circumference 15 cm + 1 cm for smell.

Calculations showed that in 1 cm of a hat I should have 2.8 loops, a bodice 3.1 loop.

Therefore, I typed:

for a hat 70 loops (yarn 330 m in 100 g in 2 threads, needles No. 3),

for a bodice 50 loops (350 m in 100 g. In 1 thread, needles No. 2).

For sleeves, you need 12 loops to start. (50-12 = 38).

38: 2 = 19-5 = 14 (this is the width of the back)

There are 24 loops left. Divide them in half into shelves = 12 loops.

 We knit a bodice (blouse)

Cast on 50 stitches.

1-5p – we knit only with the front ones (shawl fabric)

6p- 12 purl, yarn, 1 purl, yarn, 4 purl, yarn, 1 purl, yarn, 14 purl, yarn, 1 purl, yarn, 4 purl, yarn, 1 purl, yarn, 12 purl (58)

7 р-4 purl, 50 knit, 4 purl (58)

8p- 13 purl, yarn, 1 purl, yarn, 6 purl, yarn, 1 purl, yarn, 16 purl, yarn, 1 purl, yarn, 6 purl, yarn, 1 purl, yarn, 13 purl (66)

9 р-4 purl, 58 knit, 4 purl (66)

10p- 14 purl, yarn, 1 purl, yarn, 8purl, yarn, 1 purl, yarn, 18 purl, yarn, 1 purl, yarn, 8 purl, yarn, 1 purl, yarn, 14 purl (74)

11 р-4 purl, 66 knit, 4 purl (74)

12p- 15 purl, yarn, 1 purl, yarn, 10 purl, yarn, 1 purl, yarn, 20 purl, yarn, 1 purl, yarn, 10 purl, yarn, 1 purl, yarn, 15 purl (82)

13p-4 purl, 74 knit, 4 purl (82)

14p- 16 purl, yarn, 1 purl, yarn, 12 purl, yarn, 1 purl, yarn, 22 purl, yarn, 1 purl, yarn, 12 purl, yarn, 1 purl, yarn, 16 purl (90)

15 р-4 purl, 82 knit, 4 purl (90)

16p- 17 purl, yarn, 1 purl, yarn, 14 purl, yarn, 1 purl, yarn, 24 purl, yarn, 1 purl, yarn, 14 purl, yarn, 1 purl, yarn, 17purl (98)

17 р-4 purl, 90 knit, 4 purl (98)

18p-knit (98)

19p = 17 row (98)

20p-18 purl, 18 close, 26 purl, 18 close, 18 purl (62)

4 purl, 14 knit, 4 cast on needles, 26 knit, 4 cast on needles, 14 knit, 4 purl (70)

22p-knit (70)

23р-4 purl, 62 knit, 4 purl (70)

Rows 22 and 23 alternate to the desired length of the bodice. Try on.

Sew on buttons and fasten.

For the skirt, cut off a piece of fabric measuring 50 by 10 cm.Tuck one edge twice, hide the cuts, iron and stitch (sew on a typewriter).

Fold in half, sew a side seam, sew the edges with a buttonhole seam (zigzag on a typewriter) so that it does not crumble.

Sew along the upper edge with a sweeping seam (frequent stitches), and tighten. Required

Try on a skirt on a bunny so that you don’t end up with a tight skirt.

Sew the skirt to the knitted bodice of the dress. The side on the skirt should be in the middle of the bodice back.

The dress is ready, you can dress.

 We knit a hat.

Cotton yarn 330 m in 100 gr. Knitting needles number 3. Knitted in 2 strands

We knit 5 rows with an elastic band 2 * 2

Then we knit 16 rows with a checkerboard 2 * 2 (70)

22p – we knit every 2 loops together (35), keeping the checkerboard pattern 1 * 2

We continue to knit 5 rows with a checkerboard.

Then we knit 6 rows with the front stitch.

We close the hinges. Sew the side seam.

Crochet cords from air loops 30 cm long.

We insert it in front of the first row of the front surface. We pull together.

At the ends, you can make brushes or attach pompons.

Dress up the Bunny.

Leave a Comment

Your email address will not be published. Required fields are marked *