Pinterest Offical Page : Freeamigurumi
Facebook Group: Crochet and Amigurumi Free Pattern
Facebook Offical Page: Free Amigurumi Patterns
Height 18 cm.
Tools and materials:
Hook 2.5 or 2 mm. Hook 1.5 or 1.25 for eyes and emblem.
The filler is chlorofiber.
Yarn ALIZE Cotton Gold, 55% cotton, 45% acrylic, 330 m / 100 g. YarnArt Jeans is an analogue of the indicated yarn.
Colors: light lilac (or light gray, as you like), emerald, white, pale pink or flesh (for the inner part of the ears), a little yellow.
Smoother black yarn (VITA cotton LIRA, GAZZAL BABY COTTON) for the nose.
Fluffy yarn ALIZE Softy or other (composition – micropolyester), light green color for a hat and collar.
A little bit of fine black yarn for embroidering the mouth, white for the eyes, blue (or floss) for embroidering the iris, in the color of the shirt for the emblem. VITA cotton COCO is suitable, you can use another one (at least 200 m / 50 g), as an option, divide the thread of the main yarn in half.
Mouline threads are black or dark gray.
Sew-on rhinestones d = 8 mm.
Legend:
CH () – air loop
SC () – single crochet
SL-ST () – connecting post
İNC () – increase
DEC () – decrease
İNC 3in1 () – 3 single crochet, knitted in the same column of the previous row
HDC () – half double crochet
İNC HDC 3in1 () – 3 half-columns with a crochet, knitted in the same column of the previous row
DEC HDC 3in1 () – 3 double crochet, knitted together All details, unless otherwise specified, are knitted in a spiral Torso (emerald, yellow, lilac):
We start to knit in emerald color
1 p: 6 SC in the amigurumi ring
2 p: 6 İNC = 12 SC
3 p: (İNC, 1 SC) * 6 = 18 SC () * 6 – repeat 6 times
4 p: (2 SC, İNC) * 6 = 24 SC
5 p: (İNC, 3 SC) * 6 = 30 SC
6-11 RR: 30 SC
12 p: (DEC, 8 SC) * 3 = 27 SC
13 p: 27 SC
14 p: 4 SC, (DEC, 7 SC) * 2, DEC, 2 SC, SL-ST = 24
Cut the thread, fix it. We continue to knit in yellow.
We knit the 15th row with embossed front columns.
15 p: 24 relief persons. SC
We pull out the last loop longer so that it does not get lost, we do not break the thread, leave it before knitting. We continue to knit in lilac color.
16 p: behind the back wall of the yellow row (6 SC, DEC) * 3 = 21 SC
17 p: 21 SC
Pull out the last loop again, while leaving the purple thread.
We make the strapping yellow: for the remaining yellow front walls 23 SC, the last 24th we knit SL-ST and do not fasten the thread, but cut it off and take out the tip. Then we remove it through the next column inside knitting and fix it there.
We continue to knit with lilac thread
Rp 18-20: 21 SC
We stuff the torso
21 p: (DEC, 1 SC) * 7 = 14 SC
22 p: 7 DEC = 7 SC
Finish the packing, cut the thread and tighten the hole Paws (white, lilac), 4 pcs:
We start knitting in white.
1 p: 6 SC in the amigurumi ring
2 p: 6 İNC = 12 SC
3 p: SL-ST, (İNC HDC 3in1, SL-ST) * 3, 5 SC = 18 SC
4 p: SL-ST, (3 HDC, SL-ST) * 3.5 SC = 18 SC
5 p: SL-ST, (DEC HDC 3in1, SL-ST) * 3, 5 SC = 12 SC
To make a decrease in HDC 3in1, we collect all three half-columns with a crochet on the hook, knit them all together at one time and tighten them harder (but neatly), otherwise a hole will form in this place.
6 p: 12 SC
Then we knit all the legs in different ways.
Right back:
7 p: 11 SC, SL-ST, cut the thread, fasten.
We pass to the lilac color. To tie the paw, we need two lilac threads. You can pull out the second end from the middle of the ball, if it is difficult, we rewind a small amount in advance in a separate ball (the knots inside the toy are not visible, so we use the rest later).
We knit the first row when changing color on all legs with embossed front columns.
We count from the place where we finished, forward (along the course of knitting) 3 columns, between the 3rd and 4th we attach a lilac thread, we make CH to raise the column – this is the first column of the next row.
8 p: 12 relief persons. SC
9-13 pp: 12 SC
Additional rows that we will do next should be on the sides. The knitting density may vary, so it’s best to make sure you get it that way.
Pull the loop longer so that it does not get lost. We count forward (in the course of knitting) 4 columns, to the 5th we attach the second thread (from another glomerulus), knit, starting from the next column after joining the column 2 SC, SL-ST 4 columns Attach 3 columns From the place of the first connection we count back 1 more column, to the 2nd we again attach the thread from another ball, knit 6 SC, SL-ST, pull out the end of the thread again.
we cut the thread, but do not fix it, but simply pull out the tip.
Let’s go back to the deferred main thread.
14 p: 12 SC, SL-ST, cut the thread, leaving the end for sewing, fasten.
Tie the ends of the secondary thread inside the paw with knots (between each other, the initial and between each other)
Right front:
The front legs are distinguished by the fact that the color change occurs a row later.
7 p: 12 SC
8 p: 11 SC, SL-ST, cut the thread, fasten.
We count from the place where we finished, forward (in the course of knitting) 3 columns, between the 3rd and 4th
we attach a purple thread.
9 p: 12 relief persons. SC
From the 10th row to the end, we knit everything according to the description of the right hind leg.
attach
Left (back):
We count from the place where we finished the white part, 3 columns, but already back (against the course of knitting), between the 3rd and 4th we attach a lilac thread.
8 p: 12 relief persons. SC
9-13 pp: 12 SC
Pull the loop so that it does not get lost. We count forward (in the course of knitting) 4 columns, attach the second thread to the 5th, knit 2 SC, SL-ST, cut the thread, pull out the tip.
From the place of the first attachment, we count back 1 column, to the 2nd we attach the thread from another ball, knit 6 SC, SL-ST, pull out the end of the thread again.
14 p: 12 SC, SL-ST, cut the thread, leaving the end for sewing, fasten.
Left front:
7 p: 12 SC
8 p: 11 SC, SL-ST, cut the thread, fasten.
We count from the place where we finished the white part, back 3 columns, between the 3rd and 4th we attach a lilac thread.
9 p: 12 relief persons. SC From the 10th row to the end, we knit everything according to the description of the left hind foot.
We fill and sew on the paws. Do not forget that the front “toes” are higher. When sewing, we pull the higher side part higher on the body, otherwise the paw will have an ugly bump.
Sewing not to the end, we nab the paw more tightly, then we finish sewing.
Back almost Tight 3 pillars ≈ 6 rows from the beginning of knitting 3 pillars
Four paws are not always sewn successfully, therefore, after sewing on the last paw, we do not rush to break the thread, the rest can be pulled to the right place by the paws that hang.
Tail (lilac):
1 p: 5 SC in the amigurumi ring
2 p: İNC, 4 SC = 6 SC
3 p: (2 SC, İNC) * 2 = 8 SC
4 p: (İNC, 3 SC) * 2 = 10 SC
5 p: 3 SC, İNC, 4 SC, İNC, 1 SC = 12 SC
6 p: (İNC, 3 SC) * 3 = 15 SC
7-8 pp: 15 SC
9 p: (3 SC, DEC) * 3 = 12 SC
10 p: 12 SC
11 p: (DEC, 2 SC) * 3 = 9 SC
12 p: 9 SC
13 p: (1 SC, DEC) * 3 = 6 SC
We sew the front paws in a circle with a yellow thread with a chain stitch at the sewing site.
We make a seam along the body, but close to the paw.
Cut the thread, leaving the end for sewing, fix it. We fill and sew on the tail.
Head (lilac, white):
We start knitting in lilac color
1 p: 6 SC in the amigurumi ring
2 p: 6 İNC = 12 SC
3 p: (İNC, 1 SC) * 6 = 18 SC
4 p: (2 SC, İNC) * 6 = 24 SC
5 p: (İNC, 3 SC) * 6 = 30 SC
6 p: 3 SC, (İNC, 4 SC) * 5, İNC, 1 SC = 36 SC
7 p: (İNC, 11 SC) * 3 = 39 SC
From the next rows, we will begin to knit a white muzzle. Color transitions will try
make it neat, so we carefully monitor how and where the columns fit.
relief. persons. SC – embossed front column, which we knitted on the paws.
The thread change takes place on the last column of the previous color. For example: lilac 17 SC, white 5 SC
8 p: lilac: 17 SC, white: 5 embossed. persons. SC, purple: 17 SC = 39 SC
Since the broaches from the inside will be large, we constantly make sure that the stretched thread is not
strongly stretched, otherwise knitting will tighten.
17th lilac
1st white
1st embossed knit between the one that has already been knitted and the next
1st lilac knit in a distant loop that has not yet been captured
9 p: lilac: 14 SC, white: 3 embossed. persons. SC, 5 SC, 3 embossed persons. SC, purple: 14 SC = 39 SC
10 p: lilac: 12 SC, white: 2 embossed. persons. SC, 11 SC, 2 embossed persons. SC, purple: 12 SC = 39 SC
11 p: lilac: 12 SC, white: 15 SC, lilac: 12 SC = 39 SC
12 p: lilac: 13 SC, white: 14 SC, lilac: 12 SC = 39 SC
1st relief knit between the next two
3rd embossed knit between lilac and white
We knit the 1st regular white into the close one, which is already captured by the embossed
1st embossed knit between the one that has already been knitted and the next
1st lilac knit in a distant loop that has not yet been captured
1st relief knit between the next two
2nd embossed knit between lilac and white
We knit the 1st regular white into the close one, which is already captured by the embossed
1st embossed knit between the one that has already been knitted and the next
1st lilac knit in a distant loop that has not yet been captured
13 p: lilac: 13 SC, white: İNC, 1 SC, İNC, 1 SC, İNC, 4 SC, İNC, 1 SC, İNC, 1 SC, İNC, lilac: 12 SC = 45 SC
We mark the underlined columns somehow, this is the front of the head
14 p: lilac: 14 SC, white: 19 SC, lilac: 12 SC = 45 SC
15 p: lilac: 15 SC, white: 17 SC, lilac: 13 SC = 45 SC
16 p: lilac: 16 SC, white: 15 SC, lilac: 14 SC = 45 SC
17 p: lilac: DEC, 11 SC, DEC, 2 SC, white: 13 SC, purple: 2 SC, DEC, 11 SC = 42 SC
18 p: lilac: 7 SC, DEC, 7 SC, white: 11 SC, lilac: 7 SC, DEC, 6 SC = 40 SC
19 p: purple: 2 SC, (DEC, 3 SC) * 2, DEC, 2 SC, white: 1 SC, DEC, 3 SC, DEC, 1 SC, purple: 2 SC, (DEC, 3 SC) * 2 , DEC, 1 SC = 32 SC
Cut the white thread, fix it somewhere inside the head. Then we knit only in lilac color. In the 20th row with the color transition, we will not suffer, we will hide it later when sewing on the muzzle.
20 p: (DEC, 2 SC) * 8 = 24 SC
We turn the head inside out and, in turn, pull each broach on both sides to reduce possible holes in the places where the color changes. We turn the head back and stuff it.
21 p: (1 SC, DEC) * 8 = 16 SC
22-24 RR: 16 SC
We fasten the thread and cut it, leaving the end for sewing on the head. If in the “transitions” of the face something did not work out or do not like it, you can correct it with ordinary small stitches lilac thread.
The head is quite large, so we strengthen the neck.
After 6 rows from the beginning of knitting, insert 2 cotton swabs into the holes between the posts in the middle of the body in the middle.
And then another 5 pieces in the direction back.
We stuff our head well with an emphasis on the cheeks. Use your finger to make a depression in the padding in the middle of the head. We put the head on sticks and sew (not completely). Be sure to make sure that the marked center of the muzzle remains in front when sewing. When the head is almost sewn on, we tighten the neck around the sticks (it is convenient not with sharp scissors) and then we finish sewing.
6 rows
Collar (softy, light green):
With this thread, everything is “approximately”, tk. no columns are visible. But on the other hand, there are no mistakes either.
1 p: Around the neck straight along the body, knit ≈ 16 SC. Adjustment is optional, ± 1-2 SC is acceptable.
2 r: we knit a row of SC along the selected columns, cut off the SL-ST thread, pull out the tip, remove it through the next column into the collar, tie it with the initial end of the light green thread and remove the ends inside knitting.
Muzzle (white):
1 p: 6 SC in the amigurumi ring
2 p: 6 İNC = 12 SC
3 p: 1 SC, İNC, 4 SC, İNC, 1 SC, İNC, 2 SC, İNC = 16 SC
4 p: 1 SC, İNC, 6 SC, İNC, 3 SC, 2 İNC, 2 SC = 20 SC
5 p: 1 SC, İNC, 8 SC, İNC, 9 SC = 22 SC
6 p: 21 SC, SL-ST = 22, cut the thread, leaving the end for sewing, fasten.
The diagram is located as the muzzle will be sewn, it shows where the end of the row should be. The midpoint of the top coincides with the center noted earlier on the head. We make the top flatter. From below just until the last color change on the head. We fill the muzzle a little, pin it so that it does not move out anywhere and sew it on. When a small hole remains, fill it properly, finish sewing.
Hat (emerald, yellow, light green):
We start to knit in emerald color
1 p: 6 SC in the amigurumi ring
2 p: 6 İNC = 12 SC
3 p: (İNC, 1 SC) * 6 = 18 SC
4 p: (2 SC, İNC) * 6 = 24 SC
5 p: (İNC, 3 SC) * 6 = 30 SC, SL-ST, cut the thread, fix
We continue to knit in yellow. We knit the first row with embossed facial SC.
We attach the thread near the place where we finished the previous row.
6 p: 30 relief persons. SC
7 p: 3 SC, (İNC, 4 SC) * 5, İNC, 1 SC = 36 SC
8 p: (İNC, 11 SC) * 3 = 39 SC
Cut the yellow thread. Then we knit with softy light green thread. Here, the transition is ordinary posts, a fluffy thread itself will cover everything.
9-10 pp: 39 SC
We make SL-ST, cut the thread, leaving the end for sewing.
We put an unstuffed hat on the dog’s head and do not sew it completely.
When a small hole remains, then we fill the cap, but not much, it should not be very convex. We finish sewing.
Nose (black):
For the nose, take a smoother yarn.
1 p: 6 SC in the amigurumi ring
2 p: (İNC, 1 SC) * 2, İNC, SL-ST = 9, cut the thread, leaving the end for sewing, fix.
Sew on, stepping back 1 row from the beginning of knitting the muzzle up.
Eyes (white), 2 pcs:
For the eyes, we take a thin hook (1.5 or 1.25 mm) and thin yarn.
1 p: 6 SC in the amigurumi ring
2 p: 6 İNC = 12 SC
3 p: İNC, 1 SC, İNC, 2 SC, İNC, 1 SC, İNC (the second column of the increase we knit SL-ST) – incomplete row
Cut the thread, leaving the end for sewing, fix it.
Where the row was not tied – the lower side of the eye.
Sew on so that the inner part of the eye is close to the muzzle, between the eyes ≈ 1.5 columns.
Sew rhinestones inside-below, but stepping back from the edge of the eye so that the iris fits. Sew on 2 stitches with bobbin thread in half, that’s enough. With each stitch, pull the thread tightly (but neatly) so that the strass fits snugly. You can fasten the thread on the black nose, it is not visible there.
With a blue thin thread (you can floss in 4 additions), we embroider an iris around the rhinestone with a chain stitch with small stitches. We make the seam close, but not close, otherwise the pigtail will go under the rhinestone.
Initial
ring
So that the eyes do not merge with the head, we sew them with black (or dark gray) floss in 1 addition (you can use bobbin thread) as well with a chain stitch with small stitches.
Ears (pink, white), 2 pcs:
1 p: 2 SC in an amigurumi ring, do not close, knit in rows back and forth, at the end of each
row make CH and unfold knitting
2 p: 2 SC
3 p: İNC, 1 SC = 3 SC
4 p: 3 SC
We tie the resulting part on the sides SC with the indicated increments, cut the thread.
We fold the parts with the wrong side to each other and, turning the pink side towards ourselves, we tie them together SC, making İNC 3in1 at the tip of the ear. We leave the end for sewing.
We knit exactly the same white detail Do not tie Sew the ears on the sides on the cap on the border of yellow and light green flowers. So that the ears stand, besides the base when sewing, we also grab it along the side loop, pulling them to the head.
The collar emblem can be cut out of felt or a piece of fabric and drawn
look neater. But if you want to knit, we knit:
Collar emblem (emerald):
For the emblem, we take a hook 1.25 – 1.5 mm and a thin thread to match the color of the blouse (in this version, we divide the main emerald thread in half).
1 p: 6 SC in the amigurumi ring
2 p: İNC, 1 SC, İNC 3in1, 1 SC, İNC, 1 SC = 10 SC
3 p: 1 SC, İNC, 2 SC, İNC 3in1,2 SC, İNC, SL-ST – incomplete row
We knit 2 such details. On one we embroider with a thin white thread or floss in 3 additions.
Starting at the top, we sew sideways and down along the chain stitch.
Draw out the thread in the bottom corner and make a regular stitch to the top of the emblem.
We tie and cut the ends of the thread from the inside out.
We withdraw the thread a little lower and do another stitch to the sides.
We fold the parts with the wrong side to each other and tie them, connecting them, with a white thin thread. We start with a post that is between the ends.
Red indicates what we linked earlier. We tie it according to the scheme (description) of the 4th row.
1 p: 6 SC in the amigurumi ring
2 p: İNC, 1 SC, İNC 3in1, 1 SC, İNC, 1 SC = 10 SC
3 p: 1 SC, İNC, 2 SC, İNC 3in1, 2 SC, İNC, SL-ST – incomplete row
4 p: 2 SC, 2 İNC, 3 SC, İNC 3in1, 3 SC, 2 İNC, 1 SC, SL-ST = 10 SC
We remove all ends of the threads inward during the tying process. We make the last SL-ST in the loop, into which the first column was hooked.
We cut the thread, leaving a long end, fasten it.
We wrap it around the collar with three stitches (each time grabbing the emblem at the top).
We wrap a couple of times over the emblem so that the stitches do not diverge. We withdraw the thread through the body lower, there we also grab the emblem with a small stitch and fasten the thread.
We embroider the mouth with a thin black thread with a chain stitch ≈ 2 rows from the nose.
EVEREST IS READY!