Amigurumi Bee Doll Free Pattern

Pinterest Offical Page : Freeamigurumi

Facebook Group: Crochet and Amigurumi Free Pattern

Facebook Offical Page: Free Amigurumi Patterns

This master class does not contain crochet lessons. Shoes – a description of the sole and an approximate description of how to knit is given, without an exact calculation of rows and columns.

Necessary materials

For the body of the bee – yarn ALIZE Sekerim Bebe tone 552 and 137

For clothes – KAMTEX yarn Caramel, tone 15 and 44

For wings – KAMTEX yarn Caramel tone 02

1. Yarn of the main color – 100 g (330 m in 100 g)

2. Yarn of additional colors – brown 30 g, white 40 g, lilac 60 g, green 30 g.

3. Hook for your yarn

 4. Plastic eyes – diameter 18 mm

5. White felt and eyelashes

6. Transparent glue

7. Any wire – about 1 m

8. Dry pastel or eyeshadow

9. Hard plastic or cardboard

10. Any filler for toys

11. Satin ribbon – about 0.5 m

12. Thin floristic wire – 2 pcs.

13. Black floss

 Legend

SC-single crochet

HDC – half double crochet

DC-column with one crochet

SL-ST-connecting post

CH-air loop

PROP- skip

İNC – increase

 DEC- decrease

3 in1 – knit three sc in one loop

Head

1.6 sc. into magic ring

2.6 inc. – 12

3. (1 sc. Inc.) * 6-18

4. (2 sc. Inc.) * 6-24

5. (3 sc. Inc.) * 6-30

6. (4 sc. Inc.) * 6- 36

7. (5 sc. Inc.) * 6- 42

 8. (6 sc. Inc.) * 6- 48

9. (7 sc. Inc.) * 6- 54

10.54 sc

11. (8 sc. Inc.) * 6-60

12. (9 sc. Inc.) * 6-66

13-21 rows – 66 sc each

22.18 sc. 6 inc. 18 sc. 6 inc. 18 sc- 78

23.78 sc

24.18 sc. (1 sc. Inc.) * 6. 18 sc. (1 sc. Inc.) * 6. 18 sc- 90

25-28 rows – 90 sc each

29.40 sc. 10 ch. (10 sc. Prop.) 40 sc- 90

30-31 rows – 90 sc each

32.18 sc. (1 sc. Dec.) * 6. 18 sc. (1 sc. Dec.) * 6. 18 sc- 78

33.18 sc. 6 dec. 18 sc. 6 dec. 18 sc- 66

34.66 sc

35. (9 sc. Dec.) * 6-60

36. (8 sc. Dec.) * 6- 54

37. (7 sc. Dec.) * 6-48

38. (6 sc. Dec.) * 6-42

38. (5 sc. Dec.) * 6- 36

40. (4 sc. Dec.) * 6-30

41. (3 sc. Dec.) * 6-24

42. (2 sc. Dec.) * 6-18- fill

Rotik

For the back loops of the 29th row

1-3 rows – 20 sc each

4. (3 sc. Dec.) * 4-16

5.16 sc

6. (2 sc. Dec.) * 4-12

7-8 rows – 12 sc

 9.6 dec. – tie sl-st

Tuck into the main part of the head.

Antennae

Let’s start yellow

1.6 sc. into magic ring

2.6 inc. – 12

3. (3 sc. Inc.) * 3-15

4-6 rows – 15 sc each

7. (3 sc. Dec.) * 3-12

8.6 dec.- 6

9.changing the color – 6 sc. – 6

10.6 sc

11. inc. 5 sc- 7

12-14 rows – 7 sc each

15.6 sc. inc. – 8

16-18 rows – 8 sc each

19. inc. 7 sc- 9

20.8 sc. inc. – ten

21.10 sc. – fill

Leave thread for sewing

Body

Let’s start yellow

1.3 sc. into magic ring

2.3 sc

3.3 inc. – 6

4.6 sc

5. (1 sc. Inc.) * 3- 9

6. (2 sc. Inc.) * 3-12

7. (3 sc. Inc.) * 3-15

8.15 sc

9. (4 sc. Inc.) * 3-18

10. (5 sc. Inc.) * 3-21

11. (6 sc. Inc.) * 3-24

12.24 sc

13. (7 sc. Inc.) * 3- 27

14. (8 sc. Inc.) * 3-30

15.1 sc. (6 sc. Inc.) * 4. 1 sc- 34

16. 1 sc. (7 sc. Inc.) * 4. 1 sc- 38

17.38 sc

18.1 sc. (8 sc. Inc.) * 4. 1 sc- 42

19. (5 sc. Inc.) * 7- 49

20. (6 sc. Inc.) * 7- 56

21. change the color – 56 sc- 56

22. (7 sc. Inc.) * 7- 63

23.63 sc

24. (8 sc. Inc.) * 7- 70

25. (34 sc. Inc.) * 2- 72

26. (11 sc. Inc.) * 6 – 78

Change the color to yellow

27-31 rows – 78 sc each

Change to brown

 32-35 rows – 78 sc each

36. (11 sc. Dec.) * 6- 72

Change to yellow

37. (10 sc. Dec.) * 6-66

38.66 sc

39. (9 sc. Dec.) * 6-60

40.60 sc

41. (8 sc. Dec.) * 6- 54

Change to brown

42.54 sc

43. (7 sc. Dec.) * 6- 48

44.48 sc

45. (6 sc. Dec.) * 6- 42

46. ​​(5 sc. Dec.) * 6- 36

Change to yellow

47.36 sc

48. (5 sc. Inc.) * 6-42

49. (6 sc. Inc.) * 6- 48

50-57 rows – 48 sc each

58. (2 sc. Dec.) * 12-36

59.18 dec. – eighteen

60-62 rows – 18 sc each

Stuff, insert the wire and bring it into the neck, while leaving 10-12 cm free for attaching the head.

Wings

2 details

1.6 sc. into magic ring

2.6 sc

3.6 inc. – 12

4. (1 sc. Inc.) * 6-18

 5. (2 sc. Inc.) * 6-24

6. (3 sc. Inc.) * 6-30

7. (4 sc. Inc.) * 6- 36

8. (5 sc. Inc.) * 6- 42

9.42 sc

10. (6 sc. Inc.) * 6- 48

11-17 rows – 48 sc each

18. (6 sc. Dec.) * 6-42

19.42 sc

20. (5 sc. Dec.) * 6- 36

21-22 rows – 36 sc each

23. (4 sc. Dec.) * 6-30

24.30 sc

25. (8 sc. Dec.) * 3- 27

26.27 sc

27. (7 sc. Dec.) * 3- 24

28.24 sc

29. (6 sc. Dec.) * 3-21

30.21 sc

31. (5 sc. Dec.) * 3-18

32-33 rows – 18 sc each – do not fill, steam with an iron

Legs

1.6 sc. into magic ring

2.6 inc. – 12

3. (1 sc. Inc.) * 6-18

4. (2 sc. Inc.) * 6-24

5. (3 sc. Inc.) * 6-30

6-8 rows – 30 sc each

9. (13 sc. Dec.) * 2- 28

10.28 sc

11. (12 sc. Dec.) * 2-26

12. (11 sc. Dec.) * 2- 24

13.24 sc

14. (10 sc. Dec.) * 2- 22

15. (9 sc. Dec.) * 2-20

Further turning rows

16.12 sc. ch. turn.

17.12 sc. ch. turn.

18.12 sc. ch. turn.

19.dec. 8 sc. dec. ch. turn.

20.10 sc. ch. turn.

21. dec. 6 sc. dec. ch. turn.

22. dec. 4 sc. dec. ch. turn.

We cast on the sides – 4 sc each, (2 sc. Dec.) * 2 – along the toe, on the heel – 1 sc.

dec. 1 sc. dec. – eighteen

23-29 rows – 18 sc

30. (1 sc. Dec.) * 6-12

31.12 sc

32. (2 sc. Inc.) * 4-16

33-37 rows – 16 sc each

38.6 sl-st (back), 3 sc. 3 inc. 4 sc- 19

 39-40 rows – 19 sc each

41.10 sc. dec. 3 sc. dec. 2 sc- 17

42-44 rows – 17 sc each

Fill. We insert the wire, find the center in the 20th row of the body and retreat from the center by 7-8 sc in both directions. We mark the attachment points of the legs. Using a hook or any other object, we make holes and insert the ends of the wire into them, pull them through the entire part and bring them out into the neck. We sew the legs to the body. Photo on page 14.

Pens

We start with the fingers.

8 pcs.

1.6 sc. into magic ring

2.inc. 5 sc- 7

3-5 rows – 7 sc – on every 4th thread, do not cut

We connect in the palm

1.4 sc. on the first (on which the thread was not cut), 4 sc. on the second, 7 sc. on the third, 3 sc. on the second from the other side, 3 sc. on the first – 21 – put a marker

2-4 rows – 21 sc each

5 row for one hand – 2 sc. (finger and palm together), 18 sc. 1 sc (finger and palm together) – 21

5 row for the other hand – 2 sc. (3 sc. On the finger and palm together), 16 sc-21

6 row for one hand – 2 sc. (on the finger), 18 sc. 2 sc. (on the finger) – 22

6 row for the other hand – 2 sc. 4 sc. (on the finger), 16 sc- 22

7-8 rows – 22 sc each

9.11 dec. -eleven

10.11 sc

11. inc. 3 sc. inc. 2 sc. inc. 3 sc. – 14

12-13 rows – 14 sc each

14. inc. 13 sc- 15

15-21 rows – 15 sc each

22.7 sc. inc. 8 sc. – 16

23-26 rows – 16 sc each

27. inc. 15 sc- 17

28-34 rows – 17 sc each

35 for one hand – 4 sc. 3 dec. 7 sc- 14

35 row for other hands – dec. 11 sc. 2 dec. – 14

36.7 dec. – fill, insert the wire

Assembly and design

We knit a nose – in brown

1.6 sc into magic ring

2. (1 sc. Inc.) * 3

From the upper lip we go up 4 rows and sew the nose exactly in the center above the lip.

We find the 22nd row from the beginning of the knitting of the head – mark in this row the extreme increases to the center.

From them, count 4 sc to the center and go up one row – mark these points with pins – these are points 1 and 2.

Points 3 and 4 – corners of the mouth

Through the neck, insert the needle at point 1, grab 1-2 sc and return back to the neck. Repeat the same for point 2.

We again insert the needle at point 1 and output at point 4 (thread inside the part), grabbing near point 4 – 1- 2 sc

Return to point 1 and tighten well. We repeat in the same way for points 2 and 3. If the smile line does not suit you, repeat the tightening again.

Use a wide blush brush to lightly tint the area around points 1 and 2 with brown pastel or eyeshadow.

Rouge the cheeks and tint the mouth with pink pastels.

Attach your eyes, if you are satisfied with the expression on your face – glue them with transparent glue. Embroider eyebrows above the eyes, in black floss.

Sew on the antennae – in the 6th row from the spacecraft. Between them 14 sc.

For the braids, I used yarn from KAMTEX Fantasy tone 104.

The fastening method is the simplest – cut, threaded and tied. This

yarn is ideal for hair and knots are not visible at all.

Well, and how to weave pigtails – everyone knows, here we need a floral wire – weave it into braids and cut off the extra ends. Tie ribbons to match your bee’s outfit.

We also insert a wire into the wings, we put its ends into the body and sew in the center of the back.

It remains to sew handles.

Step 9 rows down from the end of the body knit and sew on the handles with a thread or button fastening.

Bell cap

We start each row with 2 ch. lifting.

1.12 dc into magic ring

2. in each loop of the row we knit – 1 dc. 1 embossed convex column, (hereinafter RVS) – in total we get 24 columns

3. in this row and further under the relief posts we knit embossed ones, under the usual ones – the usual ones – (inc. From dc.) Рвс) * 12-36

4. (1 dc. Inc. Pvs.) * 12-48

5. (2 dc. Inc. Rvs.) * 12-60

6. (3 dc. Inc. Pvs.) * 12- 72

Rows 7-13 – 5 dc. rvs-72

14. (inc. 3 dc. Inc. Pvs.) * 12 – 96

15. (inc. 2 dc. Inc. 2 dc. Inc. (Sc. Instead of pvs.)) * 12 – 132

16. (inc. 3 dc. 2 inc. 3 dc. Inc. Sc.) * 12 – 180

When knitting 5 or 6 rows – make holes for antennae (in which row to make holes depends on where you have them sewn)

Stalk

In green

1.6 sc into magic ring

2-5 rows – 6 sc each

6. inc. 5 sc. – 7

7-9 rows – 7 sc each

10. inc. 6 sc.- 8

11-13 rows – 8 sc each

14. inc. 7 sc- 9

15. (2 sc. Inc.) * 3-12

16. (1 sc. Inc.) * 6-18

17. (2 sc. Inc.) * 6-24

18. (3 sc. Inc.) * 6 – 30

19.15 ch. 3 sc. 9 hdc. 2 dc. sc. 5 sc – repeat 5 times in a circle.

Fill the top of the part a little and sew to the cap.

Skirt

We start knitting in green with an elastic band – only for the back loops.

7 ch. – behind the back loops 6 sc. ch. turn. – continue knitting until the desired waist circumference of your toy.

My clothing sizes may not match yours, make adjustments if necessary.

1. close the elastic in a circle and type 60 sc on it. – 60

2.for back loops – (1 sc. Inc.) * 30 – 90

3.changing the color – 90 dc- 90

Next, we knit according to the principle of knitting a hat.

4.1 dc. inc. rvs. – to the end of the row

5.2 dc. inc. rvs. – to the end of the row

6.4 dc. rvs.- to the end of the row

7. inc. 2 dc. inc. rvs. – to the end of the row

8.2 dc. 2 inc. 2 dc. sc.- until the end of the row

The spoon

1.6 sc. into magic ring

2.6 inc. – 12

3.12 sc

4. (1 sc. Inc.) * 6-18

5. (5 sc. Inc.) * 3-21

 6. (6 sc. Inc.) * 3-24

7-11 rows – 24 sc each

12. (2 sc. Dec.) * 6-18

13. (1 sc. Dec.) * 6-12

14. (2 sc. Dec.) * 3-9

15th and subsequent rows – 9 sc each, up to the handle length you need.

Insert wire.

Sandals

Starting with the sole – 4 pieces

Two green and two lilac

 1.17 ch. in the 3rd loop from the hook – 7 sc. 7 dc. 7dc in the last loop, on the other side of the chain – 7 dc. 7 sc.

2.4 sc. in one loop, 3 ch. and here is 1 dc. , 14 dc. (5 inc. Of dc), 16 dc. 3 dc. in 1, 4 dc. at 1., 3 dc. in 1, sl-st.

3.3 ch. 16 dc. inc. 1 dc. inc. 1 dc. 3 dc to 1.3 dc. in 1 . 1 dc. inc. 1dc. inc. 16 dc. 1 dc. inc. 1 dc. inc. 2 dc to 1.2 dc. in 1.1 dc. inc. 1 dc. inc. sl-st.

Take the green piece – fold it in half and mark the center column. Then place the sole against the bee’s leg and decide where your toe will begin. Count the required number of stitches from the center loop and attach a working thread as you knit.

Tie the number of rotary rows you need and sew on the toe on the other side of the sole – for those who can handle it, you can attach it immediately when knitting.

Attach the sandal to the leg again and decide where your heel will be – mark these posts with markers. Work the first row sc – from marker to marker, in the second and subsequent rows, make one decrease at the beginning of the row. Knit to the height you want.

On one sandal – continue knitting and cast on 7 ch. , find the center column on the toe and knit 1 sc into it, then cast on another 10 ch. – cut the thread. Attach yarn in a contrasting color and tie chains from ch. dc. by making three decreases at the junction ch. And a toe in the center.

On the second sandal, the fastener should be on the other side, so cut the thread. Dial 10 ch. , connect to the toe and continue typing ch. – 7. Now join the outer heel row. And also strap dc.

Now cut out the insole, insert it between 2 different colored sole pieces and connect in a circle sc.

Make buttonholes and sew on buttons.

You can sew on Velcro instead of buttons.

All! The bee is ready!

Leave a Comment

Your email address will not be published. Required fields are marked *