Pinterest Offical Page : Freeamigurumi
Facebook Group: Crochet and Amigurumi Free Pattern
Facebook Offical Page: Free Amigurumi Patterns
We share the amigurumi plush cat free pattern. You can visit our website for free new patterns.
Kitten Kuzya
Legend
ch – air loop
sc – single crochet
dc – double crochet
inc – increase
dec – decrease
* 6 times – repeat 6 times
= 6n – the sum of the loops in a row
sl-st – single crochet
Head (1 piece)
The marker passes through the muzzle.
1 row: 6sc in the ring amigurumi = 6p
2 row: 6inc = 12p
3rd row: (1inc, 1sc) * 6 times = 18p
4 row: (1inc, 2sc) * 6 times = 24p
5 row: (1inc, 3sc) * 6 times = 30p
6 row: (1inc, 4sc) * 6 times = 36p
7 row: 5sc, 1inc, (11sc, 1inc) * 2 times, 6sc = 39p
8 row: 6sc, 1inc, (12sc, 1inc) * 2 times, 6sc = 42p
9 row: 6sc, 1inc, (13sc, 1inc) * 2 times, 7sc = 45p
10 row: 45sc in a circle = 45p
11 row: 7sc, 1inc, (14sc, 1inc) * 2 times, 7sc = 48p
12 row: 48sc in a circle = 48p
13 row: (2sc, 1inc) * 4 times, 24sc, (1inc, 2sc) * 4 times = 56p
14th row: (3sc, 1inc) * 4 times, 24sc, (1inc, 3sc) = 64p
15-17 rows: 64sc in a circle = 64p
18 row: 16sc, 1dec, 28sc, 1dec, 16sc = 62p
19 row: (6sc, 1dec) * 2 times, 30sc, (1dec, 6sc) * 2 times = 58p
20 row: (4sc, 1dec) * 4 times, 10sc, (1dec, 4sc) * 4 times = 50p
21 row: 6sc, 1dec, 2sc, 1dec, 4sc, 1dec, 2sc, 1dec, 6sc, 1dec, 2sc, 1dec, 4sc, 1dec, 2sc, 1dec, 6sc = 42п
22 row: (5sc, 1dec) * 6 times = 36p
23 row: (4sc, 1dec) * 2 times, 12sc, (1dec, 4sc) * 2 times = 32p
24 row: (4sc, 1dec) * 2 times, 8sc, (1dec, 4sc) * 2 times = 28p
25 row: (3sc, 1dec) * 2 times, 8sc, (1dec, 3sc) * 2 times = 24p
26 row: (2sc, 1dec) * 6 times = 18p
We leave an open hole, we do not tighten the loops, we do not cut the thread.
We stuff the detail: at the crown – moderately elastic, in the cheeks – a little denser.
Torso (1 piece)
We continue knitting from the left open loops of the head. Do not stuff the part until the frame is inserted.
27 row: (2sc, 1inc) * 6 times = 24p
28 row: (3sc, 1inc) * 6 times = 30p
29 row: (2sc, 1inc) * 3 times, 12sc, (1inc, 2sc) * 3 times = 36p
30 row: (3sc, 1inc) * 3 times, 12sc, (1inc, 3sc) * 3 times = 42p
31 row: (6sc, 1inc) * 2 times, 14sc, (1inc, 6sc) * 2 times = 46p
32 row: (7sc, 1inc) * 2 times, 14sc, (1inc, 7sc) * 2 times = 50p
33 row: (7sc, 1inc) * 2 times, 5sc, 1inc, 6sc, 1inc, 5sc, (1inc, 7sc) * 2 times = 56p
34 row: (8sc, 1inc) * 2 times, 20sc, (1inc, 8sc) * 2 times = 60p
We carefully look at the marker, it should be in the center of the part, if this is not so, we will adjust its position.
35 row: 2sc, 1inc, 7sc, 10 skip loops, (6sc, 1inc) * 2 times, 6sc, 10 skip loops, 7sc, 1inc, 2sc = 44p
36 row: 3sc, 1inc, 5sc, 1inc, 24sc, 1inc, 5sc, 1inc, 3sc = 48п
37 row: 10sc, 1inc, 26sc, 1inc, 10sc = 50п
38 row: 10sc, 1inc, 28sc, 1inc, 10sc = 52п
39 row: 10sc, 1inc, 7sc, 1dec, 12sc, 1dec, 7sc, 1inc, 10sc = 52п
40 row: 9sc, 1inc, 7sc, 1inc, 16sc, 1inc, 7sc, 1inc, 9sc = 56п
41 row: 6sc, 1dec, 11sc, 1inc, 16sc, 1inc, 11sc, 1dec, 6sc = 56п
42 row: 4sc, 1dec, 13sc, 1inc, 16sc, 1inc, 13sc, 1dec, 4sc = 56п
43 row: 56sc in a circle = 56p
44 row: 3sc, 1dec, 15sc, 1inc, 14sc, 1inc, 15sc, 1dec, 3sc = 56п
We carefully look at the marker, it should be in the center of the part, if this is not so, we will adjust its position.
45 row: 27sc, 2 skip base loops, 2ch, 27sc = 56p
46 row: 2sc, 1dec, (7sc, 1dec) * 2 times, 12sc, (1dec, 7sc) * 2 times, 1dec, 2sc = 50
47 row: 50sc in a circle = 50p
48 row: 3sc, 1dec, 15sc, 1dec, 6sc, 1dec, 15sc, 1dec, 3sc = 46п
49 row: (7sc, 1dec) * 2 times, 10sc, (1dec, 7sc) * 2 times = 42p
50 row: 42sc in a circle = 42p
51 row: (6sc, 1dec) * 2 times, 10sc, (1dec, 6sc) * 2 times = 38p
Frame (1 part)
Forming the frame, it must be taken into account that it will be located approximately in the center of the body.
Focusing on the photo, and trying on the connected parts of the head and body, form just such a figure from the prepared wire.
To form a framework, start with the head. Bend the wire so that one end is longer than the other 20 cm.
Leaving the wire for the frame of the legs and tail, focus on the following proportions of the finished toy:
the length of the forelegs will be 3/4 of the length of the trunk (the palm should be at the level of the hips);
the height of the hind legs will be 1/3 of the length of the body + foot about 1.5 cm;
the length of the tail will be 3/4 of the length of the body (the length of the tail should be sufficient
in order to support the finished toy);
After we bent the wire to the required size and shape, we take a double-sided tape and a cotton pad.
All frame details are aligned from the waves. Double wires, we press tightly to each other, leaving small loops on the palms, feet and head. We wrap it with tape.
We draw tape with a cotton pad, so that all the tape is covered with cotton.
Then, remove the excess cotton. The layer should be uniform. Such a frame treatment
will not allow parts to glide over it.
Twist the free ends of the wire. Cut off the excess. We twist the twisted ends of the wire inward along the body frame and wrap it with tape together with the frame.
We insert the frame into the finished part of the head and body. For convenience, raise the front legs and tail up to the head. Gradually insert the frame into the part, extending the tail and front legs into the holes left.
Bend the hind legs slightly and spread them towards the hips. Stuff your torso.
Hind legs (2 parts: right and left)
We knit the hind legs along the open loops of the 51st torso.
We carefully look at the body marker, it should be in the center of the part. If this is not the case, we adjust its position.
Left foot
We knit the left foot on the first 19 loops of 51 rows of the trunk. Fill the part as you knit. The packing density is moderate.
1st row: 19sc = 19p
Insert a new marker for the left foot. The marker runs along the inner edge of the foot.
Be sure to follow the marker and, if necessary, adjust its position.
2 row: 1dec, 15sc, 1dec = 17p
3-4 row: 17sc in a circle = 17p
5 row: 1dec, 13sc, 1dec = 15p
6-7 rows: 15sc in a circle = 15p
8 row: 1dec, 11sc, 1dec = 13p
9 row: 13sc in a circle = 13p
10 row: 2sc, 3inc, 4sc, 1dec, 2sc = 15p
11 row: 2sc, 5inc, 3sc, 1dec, 1sc, 1dec = 18p
12 row: (1dec, 1sc,) * 6 times = 12p
13 row: 6 dec = 6p
Loops to tighten. The tightened loops appear on the sole.
Right foot
We knit the right foot on the remaining open 19 loops of 51 rows of the torso. Fill the part as you knit. The packing density is moderate.
1st row: 19sc = 19p
Insert a new marker for the right foot. The marker runs along the inner edge of the foot.
Be sure to follow the marker and, if necessary, adjust its position.
2 row: 1dec, 15sc, 1dec = 17p
3-4 row: 17sc in a circle = 17p
5 row: 1dec, 13sc, 1dec = 15p
6-7 rows: 15sc in a circle = 15p
8 row: 1dec, 11sc, 1dec = 13p
9 row: 13sc in a circle = 13p
10 row: 2sc, 1dec, 4sc, 3inc, 2sc = 15p
11 row: 1dec, 1sc, 1dec, 3sc, 5inc, 2sc = 18п
12 row: (1sc, 1dec) * 6 times = 12p
13 row: 6 dec = 6p
Loops to tighten. The tightened loops appear on the sole.
Bend the hind legs to form a foot. A small hole formed between
paws, sew with a needle.
Front foot (2 parts)
We knit the front paws along the open loops of the 35th row of the trunk.
Fill the part as you knit. The packing density is moderate.
We begin the set of loops from the center of the armpit: 2 loops along the 36th row of the trunk, then open 10 loops of the 35th row, and again along the 36th row of the trunk 2 loops.
1st row: 14sc = 14p
Insert a new marker for the front foot. The marker passes from the armpit and palm.
The palm is turned to the body. Be sure to follow the marker and, if necessary, adjust its position.
2 row: 1dec, 12sc = 13p
3-5 rows: 13sc in a circle = 13p
6 row: 1dec, 11sc = 12p
7-8 rows: 12sc in a circle = 12p
9 row: (2sc, 1dec) * 3 times = 9p
10 row: (1sc, 1inc) * 4 times, 1sc = 13p
11-13 rows: 13sc in a circle = 13p
14 row: 6dec, 1sc = 7p
Tail (1 piece)
Do not stuff the part with filler. You can not follow the marker.
When stitching, leave 15cm of thread for sewing. Knitting starts from the base of the tail.
1 row: 5ch short circuit in the ring = 5p
2 row: 1inc, 4sc = 6p
3rd row: (1inc, 1sc) * 3 times = 9p
4-5 rows: 9sc in a circle = 9p
6 row: 1inc, 8sc = 10p
7-11 rows: 10sc in a circle = 10p 12 row: 1dec, 8sc = 9п
13 row: 1dec, 7sc = 8p
14 row: 1dec, 6sc = 7p
15 row: 1dec, 5sc = 6p
16 row: all decreases until the hole is closed.
Ears (2 parts)
Let’s do the marking, according to which we will knit the ears
With pins, mark the points (see plate 1), first for the left eye, and then on the other side of the head marker, symmetrically for the right eye. Make sure symmetry
markup. Only then proceed with the set of loops.
The left and right ears fit identically:
Dial eyelets for loops, right on the knitted fabric of the head at the points.
Start looping from point 1.
When knitting, the marker is not used.
Knit in rotary rows, without lifting loops.
Make sure that the knitting is not loose
1st row: dial 12 loops:
on the outside between points 1 and 2 – 1 loop, 2 and 3 – 2 loops, 3 and 4 – 3 loops,
4 and 5 – 1 loop;
2 row: 1sc, 1inc, 5sc, 1inc, 4sc = 14п
3rd row: 10sc, 1dec, 2sc = 13p
4th row: 2sc, 1dec, 4sc, 1dec, 3sc = 11p
5 row: 4sc, 1dec, 1sc, 1dec, 2sc = 9п
6 row: 2sc, 2dec, 3sc = 7p
7 row: 3sc, 2dec = 5p
8 row: 1dec, 1sc, 1dec = 3p
Tie the eyelet along the contour with connecting posts. Do not stretch the loops, knit tightly. On the upper edge, from the crown to the cape – 8 loops, from the cape to the cheekbones – 9 loops.
Fasten and thread all the threads inward.
Registration
Cheek tightening.
Fasten the thread at point 1 (in row 8, on the marker line);
Insert the needle between 8 and 9 rows, on the marker line;
Withdraw the needle at point 2 (between 24 and 25 rows, on the marker line);
Perform several turns from point 1 to point 2, tightening the canvas;
Fasten the thread;
Eye contraction.
Fasten the thread at point 2 (in the 24th row, on the marker line);
Enter the needle at point 2 (between 24 and 25 rows, on the marker line);
Bring out the needle at point 3 (between 8 and 9 rows, backing 2 loops from the marker line to the left).
Having captured 2 loops to the left according to the pattern of the row, return to point 2;
Perform several turns, slightly pulling the eye socket to the chin.
Fasten the thread.
Do the same with the right eye socket. Point 4 is located symmetrically to point 3.
Perform tinting in the eye area.
Try on the eyes. Put them on glue or sew.
Pull the nose out of a small piece of wool. For the eyes and nose, you can also use semi beads, or black beads go color, suitable size.
Comb a little kitten. Walk lightly with a felting needle all over the hair, mark the folds on the face and under the ass.
Embroider fingers on paws
Mustache and eyebrows
Cut the fishing line into 10 pieces of 10cm. Fold each of the segments in half and tie or glue on the face in the mustache area three pieces and two pieces in the eyebrow area.